HELP & QUOTE  |  651-407-9582

Fluorometer Micro Square Cells, adaptors

SELECT OPTION:

This range of Micro Fluorometer cells has been specifically designed by Starna for use with the FCA range of adaptors listed below. The adaptor locates the square cross section cell accurately in the center of the instrument cell compartment. Therefore, for a given path length, the cell is optimized for minimum volume and maximum sensitivity. All four windows and the base of the cells are polished and are available with either an open top or with a PTFE stopper sup­ plied with the type 23­ cells.

The FCA adaptors have exterior dimensions of a standard fluorometer cell (12.5mm x 12.5mm) and interior dimensions to accommodate the square micro fluorometer cells listed. Apertures are machined into the adaptor wall to allow for transmission of the excitation and emission energy at either 8.5 or 15mm 'Z' dimension. The aluminum adaptors are black anodized to eliminate stray light. The correct adaptor for a particular cell can be identified from the listing below.

 

Width mm

Height mm

Number of Openings

FCA3.30

2.5

11

4

FCA3

2.5

21

4

FCA4

3.5

21

4

FCA5

4.5

21

4

 

From the bottom of the adaptor to the bottom of the opening is 5.5 mm for all adaptors.

Catalog

Path mm

Exterior mm

Interior mm

Adapter

Nominal

Polished

Number

Length

Width

Length

Height

Width

Length

Vol. Ml

Windows

3-3.45-SOG-3

3

5.5

5.5

45

3

3

FCA3

0.32

5

3-4.45-SOG-4

4

6.5

6.5

45

4

4

FCA4

0.56

5

3-5.45-SOG-5

5

7.5

7.5

45

5

5

FCA5

0.88

5

23-3.45-SOG-3

3

5.5

5.5

45

3

3

FCA3

0.32

5

23-4.45-SOG-4

4

6.5

6.5

45

4

4

FCA4

0.56

5

23-5.45-SOG-5

5

7.5

7.5

45

5

5

FCA5

0.88

5

3-3.45-Q-3

3

5.5

5.5

45

3

3

FCA3

0.32

5

3-4.45-Q-4

4

6.5

6.5

45

4

4

FCA4

0.56

5

23-3.45-Q-3

3

5.5

5.5

45

3

3

FCA3

0.32

5

23-4.45-Q-4

4

6.5

6.5

45

4

4

FCA4

0.56

5