HELP & QUOTE  |  651-407-9582

High Power Xenon Source


The HPX-2000-HP-DUV light source is much more intense, especially in the UV region. Driven by a 75 W source, the HPX-2000-HP-DUV provides output intensity that is almost 4x higher across the entire range compared to the output of the HPX-2000.

Both models have an integrated shutter that can be controlled by a a TTL signal or a switch on the front panel, allowing you to limit the exposure of the sample to this high intensity source.

Replacement Bulb

HPX-2000-HP-DUV-BM a xenon replacement bulb for the HPX-2000-HP-DUV



Continuous Xenon

Wavelength Range:

185 – 2000 nm

Color Temperature:

N/A (not a blackbody source)

Nominal Bulb Power:

75 W

Typical Output Power:*

6.13 mW

Warm-up Time:**

30 minutes

Source Lifetime:

1,000 hours

Trigger/Shutter Input Signal:

TTL; Up to 2.5 Hz maximum

Trigger/Shutter Connection:

SUB-D-15 pin

Integrated Filter Holder:


Operating Temperature:

5°C – 35°C

Operating Humidity:

5-95% without condensation at 40°C

Power Requirements:

85-264 V, 50/60 Hz

Power Consumption:

105 W


14.5 x 16.5 x 26 cm


6 kg

Safety & Regulatory:

CE; VDI/VDE 0160; EN 61011

Replacement Bulb:


* Typical output power coupled into a 100 μm UV/VIS fiber and measured with an optical power meter integrated from 200 – 1100 nm

**  Warm up time @23 °C ambient, free airflow, no vibrations